Payment & Shipping Terms:
|Product Name:||Copper Nickel Tube||Spec.:||ASME SB111, ASTM B111|
|Finish:||Solution Annealed, O61||Materials:||C70600, C71500|
|OD:||4.00MM - 76.2MM||WT:||0.25MM - 4.0MM|
|Package:||Wooden Case||Application:||Heat Exchanger|
CuNi30Mn1Fe Seamless Copper Nickel tube in tube heat exchanger Cu Ni 70 30 C71500 3/4'' X 0.065'' X 20''
Copper nickel tubes are commonly used in condensers, coolers and heat exchangers where resistance to corrosion and erosion are necessary. The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances.
Spezilla supply 70/30 copper nickel tubes for industries all throughout the world. At Spezilla, you will find competitive prices and high-quality 70/30 copper nickel tubes.
We produce smooth bore 70/30 copper nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These copper nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost saving.
This form of copper nickel tube gives the best service life under the most adverse conditions because of improved corrosion resistance and almost insensitive to stress corrosion. These copper nickel tubes are used in heat exchangers where severe erosion and corrosion have been experienced, especially at elevated temperatures, high velocities and extreme turbulence of the circulating media. These copper nickel tubes have an important bearing not only on the performance of heat exchangers but also on the cost and delivery cycle time of the condenser and heat exchangers where they are used.
|UNS No.||C71500 – BSI No. CN107 – ISO Name CuNi30Mn1Fe|
|Chemical Comp.||Cu rem / Ni 29 ~ 33 / Pb 0.05 / Fe 0.40 ~ 1 / Zn 1 max|
|ASTM Spec.||B 111, B 359, B395, B 466, B 467, B 543, B 552|
|ASME Spec.||SB 111, SB 395, SB 466|
|Applications||Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.|
|Temper||O61 Annealed / HR50 Drawn & Stress Relieved|
|Density||8.94 g/cc||0.323 lb/in³|
|Tensile Strength min.- O61 -/- HR50||360 MPa -/- 495 MPa||52 ksi -/- 72 ksi|
|Yield Strength min.- O61 -/- HR50||125 MPa -/- 345 MPa||18 ksi -/- 50 ksi|
|CTE, linear||16.2 10-6/°C @ 20.0 – 300 °C||9.0 10-6/°F @ 70.0 – 570 °F|
|Specific Heat Capacity||0.09 cal/g-°C @ 20ºC||0.09 BTU/lb-°F @ 70ºF|
|Thermal Conductivity||29 W/m-K @ 20.0 °C||17 BTU/ft2/ft/h/°F @ 70.0 °F|
|Melting Point||1171 – 1238 °C||2140 – 2260 °F|
Heat exchanger tubes
Ship building & ship repairs
Power steering tubes
Salt water piping systems