 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Type: | Stainless Steel Sanitary Tube / Tubing | Standard: | ASTM A270 & DIN11850 |
|---|---|---|---|
| Material Grade: | TP304/TP304L/TP316L/TP304H/TP347H | Grit: | 180#,320#,400#,600#,Mirror,bright,etc. |
| Outer Diameter: | 10mm - 89mm | Wall Thickness: | 0.25 - 3.0mm |
| Length: | 20ft | Surface Finishing: | Polished Inside And Outside |
| Shape: | Round | Package: | Wooden Case |
| Application: | Widely Used In Sewerage Disposal, Decoration, Food, Beverage, Milk, Refine Sugar, Medicine, Etc | ||
| High Light: | sanitary stainless tubing,sanitary stainless pipe |
||
Mirror Polished Stainless Steel Sanitary Tubing Seamless Pipe ASTM A270 & DIN11850
1. Stainless Steel Sanitary tubes
2. Standard: ASTM A270 & DIN11850:
3. Materials: TP304/TP304L/TP316L/TP304H/TP347H
4. Size: OD 14mm to 89mm.
Thickness: from 0.25-3.0mm, Other specificatio.ns are welcome from your request.
5. Finishing: annealed, pickled, polished inside and outside grit:: 180#, 320#, 400#, 600#, Mirror, bright,etc.
6. Packaging: each in a plastic bag, several in weaving bag
7. Application: widely used in sewerage disposal, decoration,food, beverage, milk, refine sugar, medicine, etc
SURFACE REQUIREMENTS
Surface of rolled products: No need extra polishing or smooth treatment.
Mill Finish— A finish without additional polishing oroperations intended to smooth the surface.
Mechanical polished surface: Purchasers according the same numbering abrasive (grinding stuff) to polish the products get the required products’ surface:
Finish No. 80 – A ground finish produced by polishing a tube with an abrasive media impregnated with No. 80 grit.
Finish No. 120 – No. 120 grit.
Finish No. 180 – No. 180 grit.
Finish No. 240 – No. 240 grit.
Other mechanically polished finishes may beagreed upon between the purchaser and manufacturer
Electrolytic polishing of the surface: Before this processing, manufacturer could use other ways to polish products.
The maximum average of roughness: Customers could specify the maximum roughness of internal surface, external surface and both surface.
Surface furnishment also could be decided by manufacturer or purchaser.
Normally surface treatment: Internal, External, SF4, SF3, etc.
| Type | Chemical Composition(%) | |||||||||
| ASTM | C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N |
| TP304 | ≤0.08 | 18.0-20.0 | 8.0-11.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | - - - |
| TP304L | ≤0.035 | 18.0-20.0 | 8.0-13.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | - - - |
| TP304H | 0.04-0.10 | 18.0-20.0 | 8.0-11.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | - - - |
| TP310S | ≤0.08 | 24.0-26.0 | 19.0-22.0 | ≤2.00 | ≤0.045 | ≤0.030 | ≤0.75 | ≤1.00 | - - - | - - - |
| TP316 | ≤0.08 | 16.0-18.0 | 11.0-14.0 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - - - | - - - |
| TP316L | ≤0.035 | 16.0-18.0 | 10.0-14.0 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - - - | - - - |
| TP316N | ≤0.08 | 16.0-18.0 | 11.0-14.0 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - - - | 0.10-0.16 |
| TP317L | ≤0.035 | 18.0-20.0 | 11.0-15.0 | ≤2.00 | ≤0.045 | ≤0.030 | 3.0-4.0 | ≤1.00 | - - - | - - - |
| TP321 | ≤0.08 | 17.0-19.0 | 9.0-12.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | ≤0.10 |
| TP321H | 0.04-0.10 | 17.0-19.0 | 9.0-12.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | - - - |
| TP347 | ≤0.08 | 17.0-19.0 | 9.0-13.0 | ≤2.00 | ≤0.045 | ≤0.030 | - - - | ≤1.00 | - - - | - - - |
Contact Person: Will Ma
Tel: +86 13918539222
