Payment & Shipping Terms:
|Material Grade:||TP410||Size Range:||5/8“-2”|
|Specification:||ASTM A268, ASME SA268||Finishing Options:||Pickling, Polishing, Custom Cutting|
|Test Certificate:||EN10204 3.1||Packaging:||Wooden Box, Bundled, Export Packaging Available|
|Product Name:||TP410 Ferritic Stainless Steel Tube|
seamless stainless steel tubing,
high pressure stainless steel pipe
ASTM A268 TP410 Stainless Alloy Steel Tube Ferritic Steel Seamless Tube
TP410 is the basic and typical martensitic steel alloy. It has the high hardness with good ductility and a relative limited corrosion-resistant capability.
TP410 material does not have the nickel content and has a relative low material cost. Besides, it can replace some austenitic steel grades under some mild corrosion condition.
Typical Manufacturing Specifications:
Also individual customer specifications.
TP410 is a typical martensitic chromium-alloy steel grade. It does not have the nickel content and owns the following characteristic:
- Harding by heat treatment
- High hardness with good ductility
- Good corrosion resistance capability
- Good wear corrosion resistance
- High cold-deformation property
|Tube OD.:||1/4'' - 2''|
|Wall:||0.028'' - 0.120''|
|Standard:||ASTM A268 ASME SA268|
|Finish:||Annealed & Pickled.|
|Type:||Seamless Cold Drawn|
|Mill Test Certificate:||EN10204 3.1|
|Packing:||Sleeved, Wooden Boxed|
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
Spezilla's seamless bright annealed stainless steel tubes are produced acc. to the following process and inspection to assure our quality:
1. Chemical Composition Analysis Test With 100% PMI.
2. Solution Annealing / Bright Annealed.
3. 100% Hydrostatic Test and 100% Eddy Current Test
4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.
5. Impact Test subject to Standard request.
6. Grain Size Test and Intergranular Corrosion Test.
7. Visual Test and Endoscope Test for Surface Quality Test
Available Tube Product Forms:
Used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance. Typical applications are: Bolts, Bushings, Fasteners, Gas Turbine Parts, Mine Equipment, Pump Parts, Petrochemical Equipment, Steam Turbine Parts, Studs, Valve Parts etc.
Material magnetic in all conditions.
ASTM A268 Tp410 tube composition:
Contact Person: Will Ma
Tel: +86 13918539222