Payment & Shipping Terms:
|Standard:||ASME SA213||Material Grade:||TP317,317L|
|Product Name:||Stainless Steel Cold Drawn Tube||Size Range:||OD: 4.00mm - 38.10mm; WT: 0.30mm - 3.00mm|
|Finishing Options:||Bright Annealing, Pickling, Polishing, Custom Cutting||Test Certificate:||EN10204 3.1|
|Packaging:||Wooden Box, Bundled, Export Packaging Available||Application:||Heat Exchangers|
SA213 thin wall stainless steel tube,
2.11MM thin wall stainless steel tube,
TP317 Heat Exchanger Tube
25.4x2.11MM TP317/317L Stainless Steel Tube,AMSE SA213 Stainless Steel Tube
TP317L Tubing, A213 TP317/317L Stainless Steel Tube
|Tube OD.:||3/4",1",1 1/2"|
|Length:||20FT / 6096MM|
|Standard:||ASME SA213 ASTM A213 ASTM A269|
|Finish:||AP / Annealed & Pickled|
|Type:||Seamless Cold Drawn|
|Mill Test Certificate:||EN10204 3.1|
|Packing:||Sleeved, Wooden Boxed|
ASME SA213 317 317L 317LM 317LMN Stainless Steel Tube Chemical Composition
Typical Manufacturing Specifications:
Also individual customer specifications.
Spezilla's ASME SA213 seamless stainless steel tubes are produced acc. to the following process and inspection to assure our quality:
1. Chemical Composition Analysis Test With 100% PMI.
2. Solution Annealing / Bright Annealed.
3. 100% Hydrostatic Test and 100% Eddy Current Test
4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.
5. Impact Test subject to Standard request.
6. Grain Size Test and Intergranular Corrosion Test.
7. Visual Test and Endoscope Test for Surface Quality Test
Our seamless stainless steel tubes undergo the following tests acc. to specifications:
One flattening test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from each lot.
One flaring test shall be made on speci- mens from each end of one finished tube, not the one used for the flattening test, from each lot.
Hydrostatic or Nondestructive Testing:
Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the type of test to be used shall be at the option of the manufacturer, unless otherwise specified in the purchase order.
Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydrotesting is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer’s private identifying mark, the marking requirement of section 12.3 on Hydrostatic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification.
Mill test certificates will be issued according to EN10204.1
All tubes shall be supplied as per applicable ASTM A213 /A213M Specification.
Available Tube Product Forms:
Contact Person: Will Ma
Tel: +86 13918539222