Payment & Shipping Terms:
|Material Grade:||EN 1.4401, AISI 316||Size Range:||OD: 4.00mm - 38.10mm; WT: 0.30mm - 3.00mm|
|Specification:||EN10217-7||Finishing Options:||Bright Annealing, Pickling, Polishing, Custom Cutting|
|Test Certificate:||EN10204 3.1||Packaging:||Wooden Box, Bundled, Export Packaging Available|
|Product Name:||Welded Stainless Steel Tube||Quality Assurance:||100% ET|
EN 1.4401 AISI 316 EN10217-7 TC2 D4/T3 Bright Annealed Welded Stainless Steel Tube 19.05 X 1.65MM
AISI / ASTM / UNS /SUS 316, Euronorm 1.4401, Nom. X5CrNiMo17-12-2 stainless steels molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum Stainless Steel content in this grade allow it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments. In addition, Alloy 316/ 316L provides excellent elevated temperature tensile, creep and stress-rupture strengths, as well as outstanding formability and weldability. Stainless Steel 316L is the lower carbon version of 316 and is immune from sensitization; therefore, it is very frequently used in heavy gauge welded components.
These properties are specified for the flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.
|Item Code:||SPW-EN-1.4401 / AISI 316|
|Material:||1.4401, AISI 316|
|Standard:||EN10217-7 / ASTM A249 / ASME SA249|
|Finish:||BA / Bright Annealed.|
|Mill Test Certificate:||EN10204 3.1|
|Packing:||Sleeved, Wooden Boxed|
Chemical Composition 1.4401 / AISI 316 Welded Stainless Steel Tube:
|Elements||EN 1.4401 / AISI 316 (wt%)|
|C / Max.||0.035|
|Mn / Max||2.00|
|P / Max||0.045|
|S / Max||0.005 - 0.017|
|Si / Max||1.00|
|Ni||10.00 - 11.00|
|Cr||16.50 - 18.00|
Available Tube Product Forms:
Seam welded and cold redrawn.
Seam welded, cold redrawn and annealed.
Spezilla's 1.4401 / AISI 316welded stainless steel tubes are produced acc. to the following process and inspection to assure our quality:
1. Chemical Composition Analysis Test With 100% PMI.
2. Solution Annealing / Bright Annealed.
3. 100% Hydrostatic Test and 100% Eddy Current Test
4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.
5. Impact Test subject to Standard request.
6. Grain Size Test and Intergranular Corrosion Test.
7. Visual Test and Endoscope Test for Surface Quality Test
High Performance Liquid Chromatography (HPLC)
Medical implants (including Pins, screws and implants)
Typical Manufacturing Specifications:
Also individual customer specifications.
Contact Person: Will Ma
Tel: +86 13918539222