 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Stainless Steel U Tube | Tube Shape: | U Tube |
|---|---|---|---|
| Standard: | ASTM A213 | Manufacturing: | Seamless |
| Materials No.: | TP904L | OD: | 1/2'' - 2'' |
| WT: | 0.035'' - 0.083'' | Surface: | SOLUTION ANNEALED |
| Shape: | Round | Package: | Wooden Case |
| Application: | Heat Exchanger | ||
| High Light: | u bend tube,welded finned tubes |
||
ASTM B677 TP904L Stainless Steel Seamless U Bend tube for heat exchanger
UNS NO8904, commonly known as 904L stainless steel, is a low carbon austenitic nickel-chromium stainless steel with additions of molybdenum and copper. 904L pipes, 904L sheets and plates and other 904L product forms products are mainly used where the corrosion resistant properties of 316L and 317L are inadequate, especially in severe corrosive conditions.
Due to the combination of high contents of chromium, nickel, molybdenum and copper, stainless steel 904L exhibits greater resistance to pitting and crevice corrosion and to general corrosion in reducing acids.
When compared to 2205 grade duplex stainless steel, 904L has similar corrosion resistant properties but lower mechanical strength. 2205 is also a lower cost option compared to 904L, but is not suitable for temperatures above 300°C. Overall among the three grades i.e. 904L, 316L and 2205, 316L stainless steel is the lowest cost option, but offers comparatively lower corrosion resistance.
Stainless steel 904L plates, 904L pipes, and 904L fittings are widely used for manufacturing tanks, vessels, piping, heat exchangers, and other equipment used for handling sulphuric, phosphoric and acetic acids, bleaching operations in the pulp and paper industry. In addition, 904L tube is widely used for general piping requirements in the oil and gas, chemical and pharmaceutical industries.
Standard Technical Range
Additional Testing
We are equipped to carry out heat treatment of bends plus a minimum 150mm of leg.
Heat Treatment Equipment
| C | Mn | Si | P | S | Cr | Mo | Ni | Cu | Fe |
| 0.020 max. | 2.00 max. | 1.00 max. | 0.045 max. | 0.035 max. | 19.0 – 23.0 | 4.0 – 5.0 | 23.0 – 28.0 | 1.0- 2.0 | Balance |
| 904L | |
| Density | 8 |
| Melting Range,℃ | 1300-1390 ℃ |
| Elongation % | 35 min. |
| Tensile Strength (Mpa) | 490 |
| Yield Strngth (Mpa) | 220 |
| Hardness (Brinell) | 150 |
Contact Person: Will Ma
Tel: +86 13918539222
