Payment & Shipping Terms:
|Material Grade:||GR.2||Size Range:||6MM- 38.10MM|
|Specification:||ASME SB338 ASTM B338||Finishing Options:||WLD|
|Test Certificate:||EN10204 3.1||Packaging:||Wooden Boxed|
|Product Name:||Titanium Tube||Quality:||100% Eddy Current|
ASTM B338 Grade 2 Titanium Tube / Gr. 2 Welded Titanium Tubing 25.4 X 1.2 X 6000MM
Titanium grade 2 is a commercially pure titanium and the most commonly used type of titanium for industrial applications. The alloy is used primarily for its corrosion resistance to pitting, crevice and cavitations corrosion, erosion and stress corrosion cracking in salt water, and a broad range of acids, alkalis and industrial chemicals. Titanium is a low density material with a high strength to weight ratio.
Titanium Grade 2 is a pure titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. It is corrosion resistant in highly oxidizing and middly reducing environments, castable and often utilized in cast valves and fittings.
Excellent resistant to oxidizing or mildly reducing media
Good impact properties at low temperatures
Very good resistance to corrosion and erosion by seawater and marine atmospheres
Good ductility and formability
Easy weld ability
|Tube OD.:||6.00MM - 38.10MM|
|Wall:||0.50MM - 2.0MM|
|Length:||6000MM - 12000MM|
|Standard:||ASTM B338, ASME SB338|
|Mill Test Certificate:||EN10204 3.1|
Chemical composition reference analysis (as weight %)
|Grade 7||Ti (Gr2) 0.2 Pd||x||x|
|Grade 12||Ti- 0.3Mo-0.8Ni||x||x||x|
|Grade 16||Ti (Gr2) 0.07 Pd||x||x||x|
|Titanium Welded Tube, Pipe||ASME SB338, ASME SB862||GR1, GR2, GR7, GR12||
OD: (0.315”-48”) WT: (0.0197”-0.5”)
Length: at random length
|Titanium Gr 2|
Available Tube Product Forms:
Shell and tube heat exchanger, condenser, evaporator, pipeline, etc
Seawater desalination equipment
Marine pressure tube
Spezilla's Titanium tubes are produced acc. to the following process and inspection to assure our quality:
1. Chemical Composition Analysis Test With 100% PMI.
2. Solution Annealing / Bright Annealed.
3. 100% Hydrostatic Test and 100% Eddy Current Test
4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.
5. Impact Test subject to Standard request.
6. Grain Size Test and Intergranular Corrosion Test.
7. Visual Test and Endoscope Test for Surface Quality Test
Typical Manufacturing Specifications:
Also individual customer specifications.
Contact Person: Will Ma
Tel: +86 13918539222